| Name: | 2mm 2.7mm 3mm 3.2mm Best Tin Lead Solder for Copper pipe and Wire Sn40Pb60 40 60 |
| Name: | 2mm 2.7mm 3mm 3.2mm Best Tin Lead Solder for Copper pipe and Wire Sn40Pb60 40 60 |
| Alloy: | Sn40Pb60 40/60 |
| Alloy: | Tin Lead |
| Quality: | Best Solder |
| Application: | Best Solder for Copper Pipe |
| Wire diameter: | 2mm 2.7mm 3mm 3.2mm |
| Core: | Solid core or acid core |
Product Description
2mm 2.7mm 3mm 3.2mm Best Tin Lead Solder for Copper pipe and Wire Sn40Pb60 40 60
What would be the best Tin Lead Solder for Copper Pipe and Wire?
The best solder alloy for copper pipe and copper wire would be Sn40Pb60, containing 40% tin and 60% lead. This Tin Lead Solder has very reasonable cost while have a good bonding strength to hold the coppers. It's very common to use this best solder 40/60 for plumbings, but this best tin lead solder cannot be used for soldering copper pipe of drinking water nor for any applications that requires ROHS compliant. In most cases, a thick solder wire diameter or a solder bar is more preferred for solder copper pipe and copper wire, such as wire diameter of 2mm best solder, 2.7mm solder for copper pipe, 3mm or 3.2mm solder wire etc.
Do we need to use flux when using the Best Tin Lead Solder for Copper pipe and Wire Sn40Pb60 40 60?
It would depends on the solder wire that you are using. Generally it's better to use a solid solder wire and then during soldering, apply the external flux (acid type flux) to clean the solder joint, or using a pre-fluxed acid core solder wire. Most plumbers will prefer a best solid solder wire Sn40Pb60 40 60 for their using.
How to use the Best Tin Lead Solder for Copper pipe and Wire Sn40Pb60 40 60 more properly?
When solder copper pipe with Sn40Pb60 40/60 solid core wire, clean the pipe and fittings surface using sand paper, then apply flux with flux brush, heat up the joint area with torch gun first and when it's hot enough, put the best tin lead solder 40 60 to the joint and the heat on the copper pipe and fittings will melt the best solder and the flux will help the solder to better melt and flow over to fill in the gap evenly.
When use the best solder for wire, make sure you use sand paper to clean the wire surface especially under the case that the wire has been exposed to air for some time, the surface might already be tarnished. Cleaning is necessary and then apply flux, using the best tin lead solder 40 60 to tinning the wire evenly.
Contact our sales team to buy the best solder for copper pipe and wire, we are professional manufacturer. Whatsapp / Wechat: 008613450770997 , Email: xfsolder@gmail.com and xfsolder@163.com , main website www.xfsolder.com
Hits:
