| Name: | 1mm solder wire Sn40Pb60 |
| Name: | 1mm solder wire Sn40Pb60 |
| Wire diameter: | 1mm |
| Alloy: | Tin Lead |
| Composition: | Sn40Pb60 |
| Origin: | China |
Product Description
1mm solder wire Sn40Pb60
Solder wires are available in different tin lead alloys and also in different wire diameters. Our 1mm solder wire Sn40P60 represents that the solder wire is with 1mm wire diameter and the alloy is tin / lead alloy with composition of Sn40Pb60 (40% tin and 60% lead).
Basic information of 1mm solder wire Sn40Pb60
1. Wire diameter: 1mm
2. Metal: Tin 40%, Lead 60%
3. Core of the wire: rosin flux at 2.0%
4. Weight per roll: 100g/roll, 200g/roll, 250g/roll, 500g/roll, 1000g/roll
What is the 1mm solder wire Sn40Pb60 used for?
This is for general purpose of soldering for home use or manufacturing soldering purpose. Make sure that you choose the proper wire diameter and right composition. A proper wire diameter will give you the right size of solder-joint, in case you use a too small wire than needed then you might need to solder twice which is difficult and time consuming, but in case wire is too big then it will leads excessive solder onto the joint which could lead to short-circuit. Choosing right spec of alloy is important too, the lower the tin percentage it is, the cheaper the solder wire would be, but also melting point of solder goes up and the electrical conductivity goes down, so choose the right alloy such Sn40Pb60 solder wire for a cost-efficiency.
If you need any further information about this product: 1mm solder wire Sn40Pb60, be free to contact our sales team Email: xfsolder@gmail.com or xfsolder@163.com, Whatsapp / Wechat 008613450770997 , main website www.xfsolder.com
Hits:
